Water Repellent Products for Concrete Surfaces
TK combines traditional science and frontline technology to produce an extensive line of highly-effective, durable water repellency products. TK water repellents bond at the molecular level with concrete, penetrating surfaces and changing the absorbency rate of the material itself. Unlike surface-sealants, which just paint over the problem, TK products respond to the porosity and breathability needs of the concrete, keeping excess water out, while improving allover moisture migration. Protected by chemically-bonded polymers, concrete surfaces can stand strong, not just against water but also the chemical, industrial, vehicular and environmental damage-agents that come with it. The weather will keep coming and responding to it remains a big part of the job, but TK offers options that let you take the upper hand in water-repellency.
Featured Products:
Solvent-Based Concrete Water Repellent Products:
TK-TRI-SILOXANE 290 BDS – BRIDGE DECK SEALER
Item No.: TK-290 BDS
A low viscosity, breathable, deep penetrating water repellent for concrete bridge decks and parking structures. Through the process of hydrolysis, TK-TRI-SILOXANE 290 BDS chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.
Features:
• Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.
• Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.
• The coating is colorless, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
TK-FINAL SEAL
Item No.: TK-290 FIN. SEAL
A low viscosity, breathable, deep penetrating water repellent for concrete and masonry. Due to its unique formulation, TK- FINAL SEAL may be applied as a final sealer to concrete that was previously coated with a cure and seal compound. FINAL SEAL re-solvates the cure and seal resin, penetrating into the surface and sealing it off from water and harmful deicers.
Features:
• Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.
• Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.
• The coating is colorless, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
TK-TRI-SILANE 590-40
Item No.: TK-590-40
A 40% active, one-component, deep penetrating silane water repellent for concrete and masonry. Through the process of hydrolysis, TK-TRI-SILANE 590-40 chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.
Features:
• Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.
• Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.
• The coating is colorless, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
TK-TRI-SILANE 590-1 MS (MINERAL SPIRITS)
Item No.: TK-590-1 MS
One component, deep penetrating water repellent consisting of silane in mineral spirits for protecting concrete and masonry. Through the process of hydrolysis, TK-TRI-SILANE 590-1 MS chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents.
Features:
• Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.
• Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.
• The coating is colorless, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
TK-Tri-Silane 590-90
Item No.: TK-590-90
A one-component, high performance, deep penetrating silane water repellent for concrete and masonry. TK-590-90 chemically bonds with the surface and seals it off against damage due to water infiltration, waterborne salts, chloride ions, and acids.
Features:
• Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded, to provide ultimate protection against damage due to water and chloride ion intrusion.
• Protects the surface from damage caused by water intrusion, acid rain, deicing chemicals, freeze/thaw cycles, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.
• The formulation is ready-to-use, colorless, non-darkening, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
TK-590-100
Item No.: TK-590-100
A one-component, 100% active, high performance, deep penetrating silane water repellent for concrete and masonry. TK-590-100 chemically bonds with the surface and seals it off against damage due to water infiltration, waterborne salts, chloride ions, and acids.
Features:
• Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded, to provide ultimate protection against damage due to water and chloride ion intrusion.
• Protects the surface from damage caused by water intrusion, acid rain, deicing chemicals, freeze/thaw cycles, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.
• A formulation is ready-to-use, colorless, non-darkening, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data | LEED Data
VOC Compliant Water-Based Concrete Water Repellent Products:
TK-290 BDS OTC – BRIDGE DECK SEALER
Item No.: TK-290 BDS OTC
A low viscosity, breathable, deep penetrating water repellent for concrete bridge decks and parking structures. Through the process of hydrolysis, TK-TRI-SILOXANE 290 BDS OTC chemically bonds with the surface to form a protective barrier that is far superior to traditional penetrating water repellents. “OTC” formulation meets VOC content requirements.
Features:
• Forms a chemical, and permanent, bond with the substrate to provide ultimate protection against damage due to water and deicing chemical intrusion, acid rain, freeze/thaw exposure, airborne dirt, smog, industrial fumes and most other atmospheric chemicals.
• Penetrates up to 1/4” and eliminates surface moisture which can lead to spalling, freeze damage and rebar corrosion.
• Outperforms typical water repellents which can only bond physically with the surface and thus provide marginal protection.
• The coating is colorless, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
TK-Tri-Silane 590-40 VOC
Item No.: TK-590-40 VOC
A 40% active, single-component, invisible waterproofing treatment for concrete and masonry. TK-TRI-SILANE 590-40 VOC chemically bonds with the surface and seals it off against damage due to water infiltration, waterborne salts, chloride ions, and acids. “VOC” formulation meets VOC content requirements.
Features:
• Excellent penetration and chemical reactivity provide long-lasting protection that extends the life of the surface.
• High alkali resistance and resistance against traffic abrasion.
• Deep penetrating to provide ultimate protection from water and freeze damage, spalling and rebar corrosion.
• The formulation is ready-to-use, colorless, non-darkening, non-staining and non-yellowing.
Downloads: Technical Data | Safety Data
Specialty Water-Based Concrete Repellent Products:
TK-SILOXANE DYE 5765
Item No.: TK-5765 series
A specially formulated pigmented waterproofing treatment for producing uniformly colored concrete surfaces that are water and chemically resistant. Available in standard or custom color options.
Features:
• Disguises and blends discolored or unevenly colored surfaces to produce a uniform and attractive finish.
• Protects the surface against damaging effects of water intrusion, acid rain, deicing chemicals, freeze/thaw exposure, airborne dirt, smog, industrial fumes, and most other atmospheric chemicals.
Downloads: Technical Data | Safety Data
TK-WATER & OIL REPELLENT 592
Item No.: TK-592
A single component, ultra low viscosity, deep penetrating water and oil repellent for concrete. It offers invisible protection against staining and structural damage caused by contact with water, waterborne salts, deicing chemicals and oil.
Features:
• Chemically bonds with the surface, unlike typical surface penetrating sealers which are only physically bonded.
• Allows the substrate to breathe and prevents structure damage from trapped water and waterborne salts.
• Ultra low viscosity for maximum surface penetration.
• No need for additional sealers (membrane forming) to prevent staining.
Downloads: Technical Data | Safety Data