Damp Proofing and Waterproofing Products for Below Grade Concrete

Commercial Grade Damp Proofing and Waterproofing Products for Below Grade Concrete

Commercial Grade Damp Proofing and Waterproofing Products for Below Grade Concrete


Nothing illustrates the value of a good beginning like a dry foundation. From pre-school to presidencies, this knowledge permeates our culture with a flood of maxims about solid foundations and the importance of careful preparation for growth. TK Products recognizes that establishing a structure securely in its environment makes all challenges that follow easier to manage.

TK addresses the devastating damage water can do to both above- and below-grade concrete with a broad range of product choices. From seamless sealers to breathable coatings, TK water-proofers and damp-proofers shield critical foundation surfaces and keep potential problems from hydrostatic pressure and vapor migration at bay. Frontline plastics and rubberized polymers, in both water- and solvent-based formulas, keep foundation interiors dry. Quick set- and cure-times facilitate easy coordination of other work schedules essential to building progress. Nearly all products can be applied to both newly-poured and existing concrete, addressing issues of reapplication and easy implementation when buildings are expanded or otherwise renovated.

Given the diversity of building environments nationwide, TK products conform to the most exacting environmental standards; and many products are available in formulations tailored specifically to the possible differing requirements of residential and commercial/public-building codes and regulations. There’s a TK product for every building in every set of conditions you’re likely to encounter nationwide.

Hydromax™ Waterproofing and Damp Proofing Products

hydromax-2001 A plastic solution formulation for damp proofing above or below-grade poured concrete and concrete block foundation walls to prevent the penetration of water and other chemicals.

TK-HYDROMAX 2001 DAMPPROOF COATING

Item No.: TK-2001
A plastic solution formulation for damp proofing above or below-grade poured concrete and concrete block foundation walls to prevent the penetration of water and other chemicals.
Features:
• Unlike asphalt-based products, TK-HYDROMAX® 2001 penetrates the surface to form a mechanical bond that is stronger than the concrete itself.
• Will not peel, blister or bubble.
• Neutral coloring allows for application to either the exterior of the wall or the interior as a decorative coating with additional moisture/vapor retarding benefits.

Request Price – Info

hydromax-2002 A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof

TK-HYDROMAX 2002 FOUNDATION WATERPROOF COATING

Item No.: TK-2002
A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof below-grade concrete surfaces. Available in Residential and Commercial formulations.
Features:
• Bridges crack up to 1/16″ thick to provide a seamless and continual water and chemical barrier.
• IAPMO (International Association of Plumbing and Mechanical Officials) certified.

Request Price – Info

Water-Based Hydromax™ VOC Compliant Waterproofing and Damp Proofing Products

hydromax-2001-voc A plastic solution formulation for damp proofing above or below-grade poured concrete and concrete block foundation walls to prevent the penetration of water and other chemicals. “VOC” formulation meets VOC content requirements.

TK-HYDROMAX 2001 VOC DAMPPROOF COATING

Item No.: TK-2001 VOC
A plastic solution formulation for damp proofing above or below-grade poured concrete and concrete block foundation walls to prevent the penetration of water and other chemicals. “VOC” formulation meets VOC content requirements.
Features:
• Unlike asphalt-based products, TK-HYDROMAX® 2001 VOC penetrates the surface to form a mechanical bond that is stronger than the concrete itself.
• Will not peel, blister or bubble.
• Neutral coloring allows for application to either the exterior of the wall or the interior as a decorative coating with additional moisture/vapor retarding benefits.

Request Price – Info

hydromax-2002-voc A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof below-grade concrete surfaces

TK-HYDROMAX 2002 VOC FOUNDATION WATERPROOF COATING

Item No.: TK-2002 VOC
A non-breathable, single component, fluid applied foundation coating. This solvent-based, rubberized polymer formulation is used to dampproof and waterproof below-grade concrete surfaces. Available in Residential and Commercial formulations. “VOC” formulation meets VOC content requirements.
Features:
• Bridges cracks up to 1/16″ thick to provide a seamless and continual water and chemical barrier.
• IAPMO (International Association of Plumbing and Mechanical Officials) certified.

Request Price – Info

hydromax-2003 A single-component, non-breathable, liquid applied foundation coating for waterproofing below-grade concrete.

TK-HYDROMAX 2003 RUBBERIZED WATER BASE FOUNDATION COATING

Item No.: TK-2003
A single-component, non-breathable, liquid applied foundation coating for waterproofing below-grade concrete. This water-based, rubberized coating provides a continuous protective barrier against the penetration of water and chemicals. Available in Residential and Commercial formulations.
Features:
• Bridges cracks up to 1/16″ thick to provide a seamless and continual water and chemical barrier.
• Neutral coloring allows for application to either the exterior of the wall or the interior as a decorative coating with additional moisture/vapor retarding benefits.

Request Price – Info

HYDRO SEAL™ Concrete Foundation Crack Repair Product

hydro-seal A flexible, hydrophobic, polyurethane, two-component cartridge system used to repair cracks, joints, and to prevent water leakage in concrete foundation walls

TK-HYDRO SEAL FOUNDATION CRACK REPAIR KIT

A flexible, hydrophobic, polyurethane, two-component cartridge system used to repair cracks, joints, and to prevent water leakage in concrete foundation walls. The HYDRO SEAL® kit includes everything needed to quickly and easily repair 8-10 linear feet of cracks.
Features:
• Permanently stops leaks.
• Travels into the crack and through the foundation for a complete seal.
• Works on even the smallest of cracks.
• Easy to use and convenient cartridge packaging requires no mixing or guesswork.
• Complete repair in just 1 hour.
• Suitable for repairs in confined spaces where larger pump injection is not practical.

Request Price – Info