Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1

AS-1 is a 25% solid concrete cure and seal that is clear, penetrating, high-quality acrylic/methyl methacrylate resin used to properly cure and protect industrial, commercial, retail, and multi-family housing concrete surfaces that meet ASTM 1315 and ASTM 309 standards.

Get Best Price on TK Product's AS-1

Clear

Product Description

Commercial Grade Acrylic Methyl Methacrylate Cure and Seal Meets ASTM 1315 & 309 – AS-1

Achro Seal 1 (AS-1) is a commercial grade, non-yellowing, concrete cure and seal that meets ASTM 1315 and 309 standards. AS-1 is a 25% solid, clear, penetrating, high-quality acrylic/methyl methacrylate resin used to properly cure concrete and protect industrial, commercial, retail, and multi-family housing concrete surfaces. These surfaces include new and existing parking garages, parking lots, walkways, drives, and food processing plants.

Uses For TK AS-1™ Non-yellowing Concrete Cure and Seal

  • Concrete and cementitious surfaces
  • Cement-Based Terrazzo Surfaces
  • Brick and Stone
  • Architectural Concrete
  • Industrial Applications
  • Commercial Applications
  • Residential Applications
  • Meat and Poultry Processing Plants
  • Parking Lots and Garages
  • High traffic walkways
  • Residential Patios, Driveways, Walkways
  • Basement Floors
  • Food Processing Plants
  • Warehousing and Storage Facilities
AS1 TK Products Concrete Cure and Seal Product
AS1 TK Products Concrete Cure and Seal Product

Achro Seal 1™ Cure and Seal Benefits

  • Meets the VOC Regulatory Compliance for AIM
  • Superior penetration and adhesion
  • Maximum resistance to dusting, abrasion, and damage
  • Color enhancing properties
Topic:*
Company Name:
First Name:*
Last Name:
E-mail:*
Phone:
-
Location:*
Your Role:*
Application Use:
Your Request:
Word Verification:

Preparation
Surfaces must be clean, dry, and free of oil, grease, soil, efflorescence, dust or laitance. Power washing of the surface is advised and any repairs must be made prior to application. Once the surface has been cleaned, it must be dried, and any rinse water should be removed by flushing down a drain (if permitted) or with a vacuum. A simple test to ensure proper dryness is to place a rubber mat on the floor overnight. If no visible moisture or darkening of the mat is observed, then the surface is dry enough to coat.

At this point, a small mock-up area should be applied in an inconspicuous location to test the compatibility of the coating with the prepared substrate. Allow the coating to dry and cure fully, then inspect for proper film formation, gloss, and adhesion. Confirm that the film is free from whitening or any other defects.

Mixing
The material is ready for use and requires no mixing or dilution. It is unlawful to further dilute with non-exempt solvent.

Application
AS-1 WILL DARKEN CONCRETE.

New Concrete Application
Finish trowel and allow surface water to completely dissipate. Use a low pressure (20-30 pounds) sprayer or power sprayer and apply uniformly at the specified rate of coverage (below). Avoid heavy accumulation.

Existing Concrete Application
Use a long nap applicator or a paint roller to distribute the compound more evenly. Back rolling is highly recommended. Avoid heavy accumulation. An airless sprayer or low-pressure spray equipment may be used on larger application areas. Apply a second coat to surfaces that are very porous and where absorption is rapid. Allow the coating to become tack-free between coats.

Coverage Rates of AS-1 Concrete Cure and Seal

Surface Coverage

Curing:
300-500 square feet per gallon

Dustproof/Seal:
300-500 square feet per gallon

Dustproof/Seal, Second Coat:
400-800 square feet per gallon

Dustproof/Seal, Renovation:
300-400 square feet per gallon

  • Coverage rates are provided as a guideline only. Many factors, including surface texture, porosity, and weather conditions, will determine actual coverage rates.

Achro Seal 1™ Technical Data Information

Composition and Materials
A clear, methacrylate/acrylic copolymer rea sin blended with fast-drying aromatic hydrocarbon.
Percent Solid:
25%
Flash Point:
> 100°F
Moisture Efficiency:
.18 kg/m2 @ 300 ft2/gallon (max allowed .40 kg/m2 per ASTM C-1315)
Drying Time:
Tack free: 1 hour
Open to Traffic: 2 hours
VOC Content:
< 700 g/l A.I.M. Category:
Curing and Sealing Compound
Maximum VOC:
700 g/l
Applicable Standards:
– ASTM C-1315, Type 1, Class A, B & C
– ASTM C-309, Type 1, Class A & B and Type 1D with a red dye added
– Fed. TTC-C-800A, Type 1, Class 1
– AASHTO Des. M-148., Type 1, Clear
– USDA Authorization for use in meat, poultry, and food processing plants.
– Resilient Tile Institute approval for compatibility with most resilient tile, carpet adhesives, and paints.

English Data Sheets

AS1 Concrete Cure Seal Product Data Sheet

Spanish Data Sheets

AS1 Concrete Cure Seal Product Data Sheet

(SDS) Safety Data Sheets

AS1 Concrete Cure Seal Product Data Sheet

AS-1 Sales Sheet

TK Products AS-1 Sales Sheet

LEED Information

More Products
1 and 5 Gallons TK Slab Assist Concrete Finishing Aid available in Ready to Use and Concentrate Formulas
Concentrate and Ready-to-Use Colloidal Silica Concrete Finishing Aids – Slab-Assist™